Clear, semi-viscous epoxy resin – decorative system

Clear, semi-viscous epoxy resin – decorative system

Resin: Resin epoxy clear – decorative system RE 510 Hardener: Hardener epoxy clear – decorative system RH 550

• Pot life: 20 minutes (the time it takes for the resin and hardener to react, the mixture to heat up, and the gelation time to begin)

• Bubble release: difficult

• Mixed color: completely clear and glass-like

• Mixing ratio: 100:50

• Mixed viscosity: 3000 mPa·s

Specifications of clear epoxy resin:

• 50% epoxy resin (per two units of resin, one unit of hardener)

• Completely transparent

• Minimal bubbles

• Type: semi-thin (semi-viscous)

• Opaque, light-resistant packaging

• Product lid is sealed to prevent spillage during shipping

• Suitable for beginners and novice users

Applications:

• Suitable for use in silicone molds

• Suitable for various handmade and imported molds (food-grade)

Important notes:

• Resin and hardener must be weighed with a digital scale and the ratios strictly observed.

• Stir the resin and hardener gently until they become clear (about 5 minutes) to ensure they are completely mixed.

• To prevent yellowing, close the container lid tightly after each use and keep away from direct sunlight.

• If the resin-to-hardener ratio is not observed, the mixture will not dry. It will become sticky and gummy. If warmed slightly, it will begin to loosen.

• The best temperature for working with resin is 23–25°C.

• Requires more drying time compared to high-viscosity resin.

• Gel time of semi-thin (semi-viscous) resin: 45 minutes to 1 hour. (To prevent deformation, it is better to let the resin sit for 48 hours to dry.)